Leave Your Message
180° Occupancy and Vacancy Sensor Switch - Automatic Light Control from China Suppliers and Factory
Hot Products
YM2108ZM=.jpg
YM2108CM=.jpg
YM2108.jpg
YM2108CM.jpg

180° Occupancy and Vacancy Sensor Switch - Automatic Light Control from China Suppliers and Factory

The wall sensor switch uses advanced infrared sensing technology, which can accurately sense human body movements and realize the function of automatically turning on and off lights.

The YM2107 Series switch, manufactured in China, is an innovative solution designed to replace standard light or fan switches. This advanced device automatically activates lights or fans by detecting motion from heat-emitting sources, such as individuals entering a room. Ideal for private offices, conference rooms, break rooms, lounges, hallways, and stairways, the switch ensures that lights or fans remain on until no motion is detected and the preset time delay elapses. This feature not only enhances convenience but also promotes energy efficiency. As a reliable product from trusted suppliers and factory sources, the YM2107 Series switch is perfect for any indoor space requiring automatic light control
    Contact us
    Product Detail

    Voltage
    120VAC, 60Hz
    Max Lamp Load
    • 6.7A, 800W Tungsten
    • 6.7A, 800W Magnetic Ballast
    • 6.7A, 800W Electronic Ballast
    Max Motor Load
    1/6 hp
    Time Delay Adjustment
    Preset intervals of 15 sec (Test), 1 min, 5 min, 15 min, and 30 min
    Environment & Temp
    • Indoor use only
    • Operating: 32°F to 131°F (0° to 55°C)
    • Humidity: 95% RH, non-condensing
    Coverage Range & Area
    • Range: 180° (at 20° to 25°C)
    • Area: 720ft² (47m²)
    Frequently Asked Questions

    What is the required operating voltage for this device?

    The device operates on a standard voltage of 120VAC at 60Hz.

    What is the maximum electrical load capacity it can handle?

    It supports a maximum lamp load of 6.7A (800W) for Tungsten, Magnetic Ballast, and Electronic Ballast, and a maximum motor load of 1/6 hp.

    What are the available time delay options?

    The time delay can be adjusted to preset intervals of 15 seconds (Test mode), 1 minute, 5 minutes, 15 minutes, and 30 minutes.

    Can this sensor be used outdoors?

    No, this device is rated for indoor use only.

    What is the coverage area and angle of the sensor?

    The sensor offers a 180° coverage range and can cover an area of up to 720ft² (47m²) when operating under optimal temperatures of 20°C to 25°C.

    What are the operating temperature and humidity limits?

    The operating temperature range is 32°F to 131°F (0°C to 55°C) with a humidity range of up to 95% RH (non-condensing).