Leave Your Message
180° Occupancy and Vacancy Sensor Switch - China Suppliers Factory Solution for Automatic Light Control
Hot Products
YM2108ZM=.jpg
YM2108CM=.jpg
YM2108.jpg
YM2108CM.jpg

180° Occupancy and Vacancy Sensor Switch - China Suppliers Factory Solution for Automatic Light Control

The wall sensor switch uses advanced infrared sensing technology, which can accurately sense human body movements and realize the function of automatically turning on and off lights.

,

The YM2107 Series motion-sensing switch is the perfect solution for replacing standard light or fan switches, designed with advanced technology to enhance energy efficiency. This innovative device automatically turns lights or fans on and off by detecting motion from heat-emitting sources, such as people entering the room. Ideal for use in private offices, conference rooms, break rooms, lounges, hallways, and stairways, the YM2107 ensures that lighting is activated only when needed, providing convenience and saving energy. With a customizable time delay, the lights or fan will remain on until motion is no longer detected, ensuring a seamless experience. As a reliable product made in China, this switch is a must-have for any setting that requires automatic light control. Partner with trusted suppliers or manufacturers to incorporate the YM2107 Series into your facilities and enjoy the benefits of modern automation.

,
    Contact us
    Product Detail

    Voltage

    120VAC, 60HZ

    Max Lamp Load

    • 6.7A, 800W Tungsten
    • 6.7A, 800W Magnetic Ballast
    • 6.7A, 800W Electronic Ballast

    Max Motor Load

    1/6 hp

    Time Delay Adjustment

    Preset intervals of 15 sec (Test), 1 min, 5 min, 15 min, and 30 min

    Operating Environment

    Indoor use only

    • Temp: 32°F to 131°F (0° to 55°C)
    • Humidity: 95% RH, non-condensing

    Coverage Range

    180° Range

    Area: 720ft² (47m²) at optimal temp of 20° to 25°C

    Frequently Asked Questions

    What is the required voltage for this device?

    This device operates on a standard voltage of 120VAC at 60HZ.

    What are the maximum lamp load capacities supported?

    The maximum lamp load is 6.7A / 800W for Tungsten, Magnetic Ballast, and Electronic Ballast configurations.

    What is the maximum motor load this switch can handle?

    The switch supports a maximum motor load of up to 1/6 hp.

    Can I adjust the time delay settings?

    Yes, you can adjust the time delay to preset intervals of 15 seconds (Test mode), 1 minute, 5 minutes, 15 minutes, and 30 minutes.

    Can this device be installed outdoors?

    No, this device is designed for indoor use only. It operates optimally in temperatures between 32°F to 131°F (0° to 55°C) and a humidity range of up to 95% RH (non-condensing).

    What is the coverage range and area of the sensor?

    It features a 180° coverage range covering an area of up to 720ft² (47m²), measured at the optimal temperature of 20°C to 25°C.